Dewalt 6 Amp Charger DCB1106 And 12 Amp Fast Charger DCB1112

Dewalt has announced two new chargers with a 6 amp charger DCB1106 and a 12 amp fast charger DCB1112.

Starting out with the Dewalt 6 amp charger DCB1102, it features stage 1 and stage 2 LED indicators which communicate more to the user about the state of charge of their batteries than Dewalt chargers that don’t have these indicators. The Stage 1 LED indicator blinks until the battery is approximately 80% charged, at which point it goes to solid. Once the Stage 1 LED indicator is solid green, the Stage 2 LED indicator starts blinking until the battery is fully charged. The battery is fully charged when both lights are solidly illuminated. This prevents the user from having to remove the battery from the charger to check the state of charge. According to Dewalt, it charges a 5.0Ah Battery (DCB205) to 80% capacity in under 45 minutes. It looks very similar to the original Dewalt 20V DCB101 charger but a slightly more bold design. Like the DCB101, the DCB1106 can charge both Dewalt 20V/60V and also 12V batteries. It also features through-hole mounts, secure latching, and double insulation. It will be available in spring 2020 and retail for $79 MSRP.

  • Compatible with all 12V MAX*, 20V MAX*, and FLEXVOLT Batteries
  • Stage 1 and 2 LED format communicates more to the user about the batteries state of charge
  • Latching for safe portability with battery Installed
  • Through-hole wall mounts
  • 6 Amps output
  • Double-insulated design


Free 2 day shipping – Try Amazon Prime 30-Day Free Trial

The 12 amp fast charger DCB1112 also features the stage 1 and stage 2 indicator lights like the 6 amp charger. According to Dewalt, it can charge a Flexvolt 9.0 Battery (DCB609) to 80% capacity in under 45 minutes. It also features a built in fan-assisted cooling, through-hole mounts, a latch for transporting the charger with a battery installed, and double insulation that meets UL Compliance. It will be available in spring 2020 and retail for $99 MSRP.

A big thanks to Cody Robertson for spotting!

  • Compatible with all 20V MAX* and FLEXVOLT batteries
  • Stage 1 and 2 LED format communicates more to the user about the batteries state of charge
  • Internal fan pulls air across batteries to cool and reduce hot/cold pack delays
  • Fan-assisted cooling results in faster charge times and reduced downtime in the field
  • Through-hole wall mounts
  • Double insulated design


Free 2 day shipping – Try Amazon Prime 30-Day Free Trial

DISCLOSURE:
Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. If you purchase something through a post on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info.

Leave a Reply

avatar
  Subscribe  
Notify of