Milwaukee M12 Fuel Installation Drill Driver 2505-22

Part of this years NPS19, Milwaukee introduced a new sub compact 4 in 1 drill/driver with the Milwaukee M12 Fuel Installation Drill Driver 2505-22 .

Up until recent years, if you wanted a multipurpose/multi-attachment driver you would only find them in places like the UK and other parts of the world but not in the the USA. How times have changed as Metabo, Fein and Bosch were among the few to bring these multipurpose/multi-attachment drivers to the USA and now Milwaukee brings one to the states as well.

The Milwaukee M12 Fuel installation driver is a very compact screwdriver with an interesting interface head that can accept a 3/8″ drill chuck, a 1/4″ hex chuck, a right angle adapter and an offset adapter basically making it a 4 in 1 tool. Also, both the drill and hex chucks and offset adapter can be attached to the right angle adapter for even more possibilities.

The design of the installation driver itself reminds me of a very short drywall screwdriver minus the cone tip and has a finger guard up in front. I’m not sure why it even has a finger guard, probably for safety reasons to keep your fingers from getting damaged while working but at least they made it useful by adding the built in battery fuel gauge and belt clip on its side and an LED light and a magnetic bit holder for up to two bits in the front.

On top you’ll find the 2 speed selector and an electronic forward and reverse button. Being an M12 Fuel model, you know it’s got a powerful brushless motor and it lives up to that promise with a brawny 300 in-lbs of torque.

It will be available in September 2019 with an MSRP of $229 (kit); $179 (bare tool).


M12 FUEL™ Installation Drill/Driver (2505-22)

  • RPM: 0-400 / 0-1,600
  • Max Torque: 300 in-lbs
  • Chuck: 3/8” All-Metal Ratcheting Chuck
  • Attachments: 3/8” Chuck, 1/4″ Hex, Offset, Right Angle
  • Magnetic Bit Holder: Yes
  • Length: 5.12”
  • Weight (w/ battery): 2 lbs
  • Weight (w/out battery): 1.6 lbs
  • Includes M12 FUEL™ Installation Drill/Driver, (2) M12™ REDLITHIUM™ CP2.0 Packs, (1) M12™ Charger, Attachments (3/8” Metal Chuck, 1/4” Hex, Offset, Right Angle), Belt Clip, and Compartmentalized Contractor Bag.
  • *Also available as a bare tool (2505-20). Bare tool comes with all 4 attachments and Compartmentalized Contractor Bag.

Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. If you purchase something through a post on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info.

Notify of
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x