2018 Milwaukee M18 FUEL ¼” Hex Impact Driver 2853-22 Gen 3 – More Torque Yet Smaller

Announced at this years NPS18 Milwaukee event is a 3rd generation or Gen 3 version of the Milwaukee M18 Fuel impact driver model 2833-22. As is the tradition with prior Fuel impact drivers is to shrink them down and yet somehow improve performance with added torque.

The new Gen 3 Milwaukee M18 Fuel impact driver model 2833-22 is now unbelievably compact at 4.59 inches in length! That makes it about a half inch shorter in length than their super compact M12 Fuel impact driver! Torque is also up at 2,000 in-lbs!

Just like the previous Gen 2 model, the new Milwaukee M18 Fuel impact driver model 2833-22 will also get their 4 mode drive control which is basically 3 speed settings plus a fourth self tapping screw mode setting.

The new Milwaukee M18 Fuel impact driver model 2833-22 is coming out in July 2018 and will be replacing the current Gen 2 models. Later in 2018 we will also receive a One Key version of the new Gen 3 impact driver.

M18 FUEL™ ¼” Hex Impact Driver Kit (2853-22)- replacing 2753

  • Volts: 18V
  • Torque: 2,000in-lbs
  • RPM: 0-3,600 RPM
  • IPM: 0-4,300 IPM
  • 4-Mode DRIVE CONTROL™ with Self-Tapping Screw Mode
  • Single Hand Bit Insertion
  • Tool Length: 4.59”:
  • Tool Weight (w/ XC5.0 battery): 3.8lb

Includes M18™ FUEL ¼” Hex Impact Driver, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M18™ and M12™ Multi-Voltage Charger, Belt Clip, and Bit Holder.
*Also available as a bare tool (2853-20)

DISCLOSURE:
Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. If you purchase something through a post on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info.

Leave a Reply

avatar
  Subscribe  
Notify of