Milwaukee M18 Fuel Super Hawg 2019 Gen 2 Upgraded Model

Milwaukee announced a new Gen 2 M18 Fuel Super Hawg this year 2019 and it receives a few upgrades under the hood. This is the corded right angle drill great for plumbers and builders.

From the exterior it looks almost identical to the original (although it does have a few cosmetic tweaks) while most of the upgrades are underneath the hood. The improvements are a new 2 speed gearbox sporting faster RPM speeds of 0-450 / 0-1550 and also gets better performance. It can now do holes as big as 6-1/4″ through 6″ beams and thanks to the increased power and higher RPM gearbox, you can expect faster drilling than before. In fact, Milwaukee states the new M18 Fuel Super Hawg is as fast as corded in application.

M18 FUEL™ SUPERHAWG™ ½” Right Angle Drill

As far as physical dimensions go, weight stays the same and the length decreases a little by over half an inch. And just like all cordless M18 Hole Hawg’s and Super Hawgs, it comes in two flavors: with a traditional 1/2″ keyed chuck or 7/16″ QUIK-LOK hex chuck. The 1/2″ keyed chuck variant has a built in key holder near the battery holder.

The new Milwaukee M18 Fuel Super Hawg’s come with the new High Output HD 6.0’s if purchased as a kit and the runtime goes up slightly at up to 100 2-9/16″ holes per charge which is a slightly better holes per amp hour runtime ratio than the previous model.

the new M18 FUEL SUPER HAWG has the power to drill 6-1/4” holes through 6” beam at corded speed, as well delivering the run-time to complete single family home rough-ins or the ability to rough-in multiple multi-family units on a single charge.

The new Milwaukee M18 Fuel Super Hawg will be available August 2019 for $699 as a kit with two 6.0 batteries, charger and tool bag or $399 as a bare tool.

M18 FUEL™ SUPER HAWG® ½” Right Angle Drill Kit (2809-22)

  • Low Speed: 0-450 RPM / High Speed: 0-1550 RPM
  • Mechanical Clutch in Low Speed
  • ½” All-Metal Keyed Chuck
  • On-Board Chuck Key Holder
  • 14 lbs (with battery)
  • Includes M18 FUEL™ SUPER HAWG®, (2) M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Packs, (1) M12™ & M18™ Multi-Voltage Rapid Charger, Side Handle & Contractor Bag
  • *Also available as a bare tool (2809-20)

M18 FUEL™ SUPER HAWG® 7/16” Right Angle Drill w/ QUIK-LOK™ Kit (2811-22)

  • Low Speed: 0-450 RPM / High Speed: 0-1550 RPM
  • Mechanical Clutch in Low Speed
  • 7/16” QUIK-LOK™ Chuck
  • 13.5 lbs (with battery)
  • Includes M18 FUEL™ SUPER HAWG® w/ QUIK-LOK™, (2) M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Packs, Extended Capacity Battery Packs, (1) M12™ & M18™ Multi-Voltage Rapid Charger, Side Handle & Contractor Bag
  • *Also available as a bare tool (2811-20)


DISCLOSURE:
Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. If you purchase something through a post on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info.

Leave a Reply

avatar
  Subscribe  
Notify of