Milwaukee announces new nail pullers, pry bars and new drilling hammer. Check out the full press release below for all the deets!
Full disclosure: This is not a review, this is tool news. Tool Craze cannot guarantee the accuracy of the information/specifications/features of any tool listed in this article. Manufacturer marketing claims may not always meet expectations. Tool Craze is not responsible if products do not live up to claimed expectations. Please do your full research before buying any products. Tool Craze is an Amazon Associate, and also an affiliate with the Home Depot, Acme Tools, Ohio Power Tool, Tool Nut, Lowe’s, Ebay, and Walmart and places paid links to these retailers. If you purchase something through a link on the Tool Craze site, Tool Craze may get a small share of the sale.
MILWAUKEE, WI – Milwaukee Tool continues to grow their hand tool solutions for the trades with the introduction of a 3lb Drilling Hammer, Nail Pullers, a Molding Puller, and Pry Bars. Designed specifically for the challenges associated with wrecking and demolition, these new solutions offer superior versatility, accessibility, and durability.
Equipped with both a milled and smooth face, the new 3lb Fiberglass Drilling Hammer offers unmatched versatility on the jobsite. The milled face provides additional grip on chisels, punches, stakes, and spikes to reduce slippage or mis-strikes, while the traditional smooth face is optimized for general demolition and driving applications. Complete with a high-strength fiberglass handle and reinforced overstrike protection, the new hammer provides ultimate power and durability. For ease of use, the hammer is precision balanced and delivers forceful blows with less effort.
Nail and Molding Pullers
To remove nails quickly and efficiently, the new Nail Pullers and Molding Puller are complete with a SMOOTHPULL™ High-Leverage Head for maximum leverage. All pullers feature a durable, wear-resistant grip for reduced vibration and increased comfort. Precision beveled edges on the claws allow for better grip on hard-to-reach nails, and an integrated nail remover on the head of the pullers allows users to remove embedded nails in multiple ways while limiting damage to surrounding materials. For wedging and prying in tight spaces, the Molding Puller comes with a whale tail claw. For increased efficiency on the jobsite, the 9” Finish Nail Puller is optimized with 6D-12D nail slots, the 10” Nail Puller and 10” Molding Puller are optimized with 8D-16D nail slots, and the 12” Nail Puller is optimized with 10D-20D nail slots.
The new Pry Bars feature SHOCKSHIELD™ grips for ultimate vibration reduction. Built to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull, and scrape, the claws are induction-hardened for added strength and long-lasting sharpness. For easier prying, the pry bars are complete with high-leverage heads and will be available in 12” and 15” lengths.
Milwaukee Tool’s new wrecking hand tool solutions are designed to provide users with the versatility, accessibility, and durability they need on the jobsite.
Drilling Hammers – Available July 2020
- 48-22-9310 3lb Fiberglass Drilling Hammer – $17.97
Nail and Molding Pullers – Available September 2020
- 48-22-9030 9” Finish Nail Puller – $12.97
- 48-22-9031 10” Nail Puller – $16.97
- 48-22-9032 12” Nail Puller – $18.97
- 48-22-9033 10” Molding Puller – $16.97
Pry Bars – Available September 2020
- 48-22-9034 12” Pry Bar – $10.97
- 48-22-9035 15” Pry Bar – $12.97
Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. If you purchase something through a link on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info. Tool Craze cannot guarantee the accuracy of the information/specifications/features of any tool listed in this article. Please do your full research before buying any products.