Milwaukee M18 Fuel 9 Inch Large Angle Grinder 2785-21HD

This is turning out to be the best Milwaukee NPS event in 2018 as they announced another impressive 18 volt tool, the Milwaukee M18 Fuel 7 inch / 9 Inch Large Angle Grinder !

Full disclosure: This is not a review, this is tool news. Tool Craze cannot guarantee the accuracy of the information/specifications/features of any tool listed in this article. Manufacturer marketing claims may not always meet expectations. Tool Craze is not responsible if products do not live up to claimed expectations. Please do your full research before buying any products. Tool Craze is an Amazon Associate, and also an affiliate with the Home Depot, Acme Tools, Ohio Power Tool, Tool Nut, Lowe’s, Ebay, and Walmart and places paid links to these retailers. If you purchase something through a link on the Tool Craze site, Tool Craze may get a small share of the sale.

Cordless 4-1/2 inch grinders have been around for several years and just in the past year have tool brands been coming out with large 9 inch cordless angle grinders. Makita and Metabo have been some that have done this, however they needed 36 volt power to accomplish this. So it’s impressive to see that Milwaukee accomplished a cordless large 9 inch angle grinder with only 18 volts! It’s no surprise they were able to do this as sister company AEG (Ridgid) was able to do this and while running on 18 volt batteries as well. No doubt the new Milwaukee M18 Fuel 9 Inch Large Angle Grinder is built to take advantage of their newly announced 12.0 ah battery.

The new Milwaukee M18 Fuel 9 Inch Large Angle Grinder 2785-21HD takes advantage of the new 12.0 ah battery and the grinder itself is said to offer the same performance of a corded 15 amp grinder! Yet is up to 2 lbs lighter.

Expect the Milwaukee M18 Fuel 9 Inch Large Angle Grinder to arrive July 2018. You can pre order via the link below in the meantime.

Specifications

M18 FUEL™ 7”/9” Large Angle Grinder Kit (2785-21HD)

  • Wheel Diameter: 7” /9”
  • Switch Type: Trigger
  • Spindle: 5/8” – 11
  • RPM: 6,600
  • Line Lock-Out: YES
  • Overload Protection: YES
  • Tool-Free Accessory Change: YES
  • Tool-Free Guard: YES
  • Electronic Clutch: YES
  • Anti-Vibration Handle: YES
  • Length: 18.5”
  • Weight: 11.95lbs (8.7 lbs. bare tool)
  • 5 year warranty

Includes M18 FUEL™ 7”/9” Large Angle Grinder, (1) M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery, M18 & M12 Multi-Voltage Rapid Charger, 9” Type 27 Guard, FIXTEC Nut, Backing Flange, Spanner Wrench and Contractor Bag.
*Also available as bare tool (2785-20) & (2) Battery Kit (2785-22HD)

DISCLOSURE:
Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. Tool Craze is an OhioPowerTool affiliate and an Amazon Associate and places paid links including those from other retailers Tool Craze is an affiliate partner with. If you purchase something through a link on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info. Tool Craze cannot guarantee the accuracy of the information/specifications/features of any tool listed in this article. Please do your full research before buying any products.

2 Comments

  • Ecotek says:

    Double check me, but I think the AEG grinder mentioned in this article used two 18volt batteries. Although I don’t recall if they were wired in series or parallel.

    • Javier says:

      Good observation. While the AEG brushless grinder has slots to hold two batteries, it only requires one to operate so it’s a 18v 9 inch grinder. Adding a second battery increases runtime.

Leave a Comment