Thanks to Joshua B. we have learned that Ridgid has created not, one but several new welder models. Let’s checked them out below.
Disclosure: This is tool news. Tool Craze cannot guarantee the accuracy of the information of any tool listed in this article. Manufacturer marketing claims may not always meet expectations. Tool Craze is not responsible if products do not live up to claimed expectations. Please do your full research before buying any products. Tool Craze is an Amazon Associate. Also an affiliate with the Home Depot, Acme Tools, Ohio Power Tool, Tool Nut. As well as an affiliate with Lowe’s, Ebay, Greenworks, and Walmart and places affiliate links to these retailers. If you purchase through a link on this site, we may get a share of the sale. Any pricing mentioned is based at the original time of writing.
Fair Use – Section 107 of the Copyright Act. It identifies examples of fair use of copyright-protected works in certain circumstances. Circumstances such as criticism, comment, news reporting, teaching, scholarship, and research. Any use of copyright-protected material in this article, falls into one or more of the following categories under “Fair Use”. Categories of Fair Use on this site may include the following: news reporting, criticism, comment, research, and teaching.
Ridgid Welder Models
Ridgid 140 Amp 120V Electric Multi-Process Welder Shown
I’m not exactly sure how many new welders Ridgid has but we were able to find 4 of them. Joshua B. found one 140 amp model and as I was trying to find more info on that model, stumbled across 3 more. This is what we found, two arc welder, stick/TIG models of 90 amp and 180 amp variants as well as two multi-process models of 140 amp and 190 amp variants. The multi-process welder models offer stick/TIG welding plus also have the ability for MIG and flux core welding. This makes the multi-process welders 4 in 1 machines.
These welder models are priced at $299.99 and $499.99 for the 90 and 180 amp stick/TIG models. The multi-process welders are a bit more at $599.99 and $999.99 for the 140 and 190 amp models. None are available at the time of writing but we can expect them to come out in the near future.
Ridgid 90 Amp 120V Electric Arc Welder, Stick/TIG
From Manufacturer:
RIDGID 100 ST stick/DC TIG machine prioritizes lightweight construction. Its space-efficient design and user-friendly nature make it an excellent choice for beginner welders. Shielding gas is not required to operate this machine.
- Stick/DC TIG welder
- Duty cycle: 30% at 80 amp
- Welds 16-gauge up to 1/4 in.
- 120-Volt input
- 90 amp output
- Beginner friendly: designed with portability and user-friendliness in mind, the RIDGID 100 ST is perfect for those who are new to welding
- Handles up to 1/8 in. electrodes
- Includes: 8 ft. electrode holder and 8 ft. ground clamp does not include: a TIG torch
- No foot pedal operation
Ridgid 180 Amp 120V/240V Electric Stick/TIG
From Manufacturer:
The RIDGID Stick/TIG 180 is a dual-voltage stick and DC TIG machine that utilizes inverter technology and infinite current control. This machine works great for welds up to 1/2 in. of mild steel, making it great for beginners. However, it is not reco mmended for use on aluminum.
- Stick/DC TIG welder
- Duy cycle: 80 amp at 30% for 120-Volt, 180 amp at 25% 230-Volt
- Welds up to 1/2 in. of mild steel not recommended on aluminum
- 120-Volt/230-Volt multi-voltage power
- Amperage range: 10 amp to 90 amp for 120-Volt, 10 amp to 180 Amp for 230-Volt
- Includes: 8 ft. electrode holder and cable, 8 ft. ground clamp and cable, 230-Volt to 120-Volt adapter and a 6 ft. power cord does not include: a TIG torch
- Input power: 1 Ph-50/60Hz
- Recommended electrodes: E6010 and E6011: 3/32 in. at 30 Amp to 75 Amp, 1/8 in. at 35 Amp to 120 Amp, 5/32 in. at 80 Amp to 160 Amp, E6013: 1/16 in. at 20 Amp to 50 Amp, 3/32 in. at 40 Amp to 90 Amp, 1/8 in. at 50 Amp to 130 Amp, 5/32 in. at 90 Amp to 180 Amp, E7014: 3/32 in. at 40 Amp to 90 Amp, 1/8 in. at 60 Amp to 130 Amp, 5/32 in. at 90 Amp to 180 Amp, E7018: 3/32 in. at 50 Amp to 100 Amp, 1/8 in. at 80 Amp to 160 Amp, 5/32 in. at 90 Amp to 180 Amp no foot pedal operation on this machine, lift start TIG only
Ridgid 140 Amp 120V Electric Multi-Process Welder
From Manufacturer:
RIDGID 140 multi-process 4-in-1 machine is a versatile welding machine that combines 4 processes, stick, MIG, flux-core and TIG, into 1. This machine utilizes inverter technology to increase efficiency and control, and has infinite control for voltage and wire speed. It is a lightweight machine made for beginners experimenting in DIY projects and repairs.
- Stick/MIG/TIG/flux-core welder
- Plate thickness range: up to 1/4 in.
- Duty cycle: stick 30% at 80 amp, MIG 30% at 90 amp and TIG 30% at 110 amp
- Rated output voltage range 12-Volt to 23-Volt 120-Volt input power
- Rated output current range 43-110 amp full output current range: 10-140 Amp
- No gas required no foot pedal operation
- Includes: 10 ft. MIG gun, 8 ft. electrode holder, 8 ft. ground clamp, 20 amp to 15 amp adapter and 1 additional 0.030 in. contact tip
- Wire feed speed range: 79 in. to 197 in. per minute (IPM) uses gas or gasless wire 0.030 in./0.035 in. up to 1/8 in. stick electrode
Ridgid 190 Amp 120V/240V Electric Multi-Process Welder
From Manufacturer:
The RIDGID 190 MP multi-process welder is a versatile machine that combines 4 welding processes. MIG, Stick, Flux-Core, and DC TIG into 1 powerful unit. This 4-in-1 machine utilizes dual-voltage 120-Volt/240-Volt and 10-200 AMP output and welds up to 3/8 in. This machine features enhanced despooler technology which automatically sets optimal spool tension.
- MIG, stick, flux-core, DC tig welder
- Plate thickness: up to 3/8 in.
- Input voltage: 120-Volt/240-Volt
- Amperage range (MIG and flux-core): 120-Volt: 30 amp to 120 amp 240-Volt: 30 amp to 200 amp amperage range (stick): 120-Volt: 10 amp to 80 amp 240-Volt: 10 amp to 190 amp amperage range (TIG): 120-Volt: 10 amp to 85 amp 240-Volt: 10 amp to 190 amp output power: 120 amp/200 amp
- No foot pedal operation
- Includes: RIDGID 190 MP MIG stick TIG flux-core welder, 6 ft. power cable, 8 ft. stick electrode holder, 8 ft. ground cable and clamp, 120-Volt-240-Volt adapter cord, 6 ft. gas hose, 10 ft. MIG gun (Euro connect), gas regulator, spare 0.030 in. and 0.035 in. tips does not include: a TIG torch, spool gun (for aluminum)
- Machine has a 7-pin amphenol style connection for connecting a spool gun accessory
- Electrode diameter: up to 5/32 in.
- Wire diameter: up to 0.035 in.
- Certification: CSA Listed
- Phase: single
- Frequency: 50 Hz/60 Hz
DISCLOSURE:
We are a participant in The Home Depot Affiliate Program. It is an affiliate advertising program designed to provide a means for us to earn fees by linking to homedepot.com. Tool Craze does not sell this product or any product on the Tool Craze website. We do not handle the sale of any item in any way. Please refer to the About section for more info.
You may also like:
Leave a Comment