Milwaukee PIPELINE Event Episode 1 – New M12 M18 Tools & Accessories List!

The first episode of the Milwaukee Pipeline event is under way. What new tools have they announced? Check them out below!

New in M18

Milwaukee M18 Fuel 1″ D Handle High Torque Impact Wrench with extended anvil 2869-22HD 2869-20 – already announced earlier

Milwaukee Says: Milwaukee Tool just elevated the productivity for diesel technicians that work on commercial
lug nuts and other heavy equipment with the introduction of the world’s first cordless 1″ D-handle extended anvil high torque impact wrench. Delivering up to 2,000 ft-lbs. of nut-busting torque and 1,900 ft-lbs. of fastening torque, the M18 FUELTM 1″ D-Handle Extended Anvil High Torque Impact Wrench /w ONE-KEYTM is an incredible breakthrough for cordless power tool technology. In addition to power, this tool delivers the run-time to accomplish a full day of work whether on the road or in the shop. Through ONE-KEYTM users can take advantage of Lug Nut Mode – a unique feature which, when enabled, prevents the risk of over-torqueing commercial lug nuts.

Launches October 2020.

  • 1″ extended anvil
  • D-Handle impact wrench
  • up to 2000 ft-lbs nut busting torque
  • upt to 1900 ft-lbs fastening torque
  • One-Key connectivity
  • Lug Nut Mode prevents overtorqueing commercial lug nuts

2 New M18 Fuel impact wrenches Gen 3

  • M18 Fuel Compact impact wrench
  • M18 Fuel Mid Torque impact wrench

Milwaukee M18 Fuel compact impact wrenches

These new Gen 3 M18 Fuel compact impact wrenches are only 4.8 inches in length and offer up to 250 ft-lbs nut busting torque. They will come in friction ring and pin detent flavors. FRICTION RING: 2854-20, 22, 22CT; 2855-20, 22 PIN DETENT: 2855P-20, 22 . They will launch in November 2020.

Milwaukee M18 Fuel Mid Torque impact wrenches

These new Mid Torque impact wrenches are also very compact at only 5.1 inches in length and put out lots of power for their small size at up to 650 ft-lbs nut busting torque. They are said to offer the best power to weight ratio for impact wrenches in their class. Also come in friction ring and pin detent flavors. FRICTION RING: 2960-20, 22, 22CT ; 2962-20, 22 PIN DETENT: 2962P-20, 22 . They will launch in November 2020.

Milwaukee M18 Fuel Oscillating Multitool 2836-21

Milwaukee Says: This new multi-tool delivers the best multi-tool experience in the industry, generating the fastest cuts, the power for demolition cuts, and the lowest full-tool vibration.

Similar in design to the just announced M12 Fuel multitool, the M18 Fuel multitool promises fastest cuts, the power for demolition cuts and the lowest full tool vibrations. These are big claims indeed. I wonder if it can overthrow the mighty Rockwell F80 corded multitool in raw speed? They reduced vibration by adding foam blocks to the motor, separating the motor from the housing. The light is a multi-light array bar in the front to give 180 degree of light view. Has a on/off slide switch with variable speed dial. Variable speed dial has an A which stands for Auto-Load. This feature starts at low speed and then when it senses a cut, ramps up to fit the job at hand. Launches October 2020.

  • brushless motor
  • OPM Highest Setting: 20,000 OPM
  • OPM Lowest Setting: 10,000 OPM
  • Oscillation Angle: 4.2 Degrees
  • Not starlock mount
  • tool-free blade change (latch & pin)
  • variable speed dial with A mode
  • 180 degree multi LED front
  • Length: 12.2”
  • Height: 3.9”
  • Weight: 4.2 lbs w/battery
  • 3-year warranty on battery
  • 5-year warranty on tool
  • New Milwaukee blades

Milwaukee M18 Fuel Compact Vacuum 0940-20

The M18 FUELTM Compact Vacuum delivers up to 50% more sustained suction than many other cordless compact vacuums currently available and features exclusive two-stage debris separation for the most efficient clean-up experience. In addition, five dedicated solutions (powered flood tool, floor tool, crevice tool and flexible hose, brush tool, and utility tool) allow this vacuum to tackle almost any obstacle.

Very versatile can be used as a small compact “tea kettle” style vacuum and with the included accessories and wands can be used as a floor stick vacuum. Powerful brushless motor provides up to 18 minutes in High Mode and 28 minutes in Low Mode. It is designed for dry vacuuming only and launches in October 2020.

  • Air Volume: 32 CFM
  • Sealed Suction: 80” H20
  • Air Performance: 98 Air Watts
  • Canister Capacity: 0.25 Gallons
  • Inlet Diameter: 1-1/4”
  • Height: 11.65”
  • Length: 13.07”
  • Width: 6.39”
  • Weight: 4.35 lbs
  • Warranty: 5-Year Limited

Milwaukee M18 Fuel Packout 2.5 Gallon Wet Dry Vacuum 0970-20

Much like their current M18 2 gallon wet dry vacuum but better in every way. It has a more powerful brushless motor is said to run 2x quieter than similar vacs at only 87 db loudness and with an 8.0 ah battery the runtime is said to be up to 30 minutes in High Mode and over 50 minutes in Low Mode. It is slightly larger with its 2.5 gallon tank and also has onboard storage. All of that and since it’s part of the Packout system, it can stack and connect to other Packout storage. It launches in October 2020.

  • Air Volume: 50 CFM
  • Sealed Suction in Water: 47”
  • Sound Power Level: 87 dB(A)
  • Canister Capacity: 2.5 Gallons
  • Inlet Diameter: 1-1/4”
  • Height: 12.8”
  • Length: 17.1”
  • Width: 10.5”
  • Weight: 11.3 lbs
  • Warranty: 5-Year Tool
  • Includes: M18 FUEL™ PACKOUT™ 2.5 Gallon Wet/Dry Vacuum, Flexible Hose, HEPA Filter, Crevice Tool, Utility Nozzle, Vacuum Power Tool Adapter.

Milwaukee M18 Fuel Sectional Sewer Machine For 5/8″ and 7/8″ Cable

The M18 FUELTM Sectional Machine for 5/8″ and 7/8″ Cable is the most portable and most
powerful sectional machine for 1-1/4″ – 6″ drain lines. The POWERSTATETM Brushless Motor
and REDLINK PLUSTM Intelligence delivers the power to clear heavy roots up to 150 ft out,
providing more power than corded even at the maximum capacity of the machine. The
sectional machine ensures the easiest transportation and setup on all jobs by being lightest
weight and most compact tool in its class, and offers carry strap connection points for
hands-free transportation. The M18TM REDLITHIUMTM High OutputTM HD12.0 Battery Pack
powers through multiple jobs on a single charge, and increases safety by providing power
anywhere without the use of extension cords.

Launches in November 2020. 2818A-21, 2818B-21, 2818-21

New In M12

Milwaukee M12 Fuel 1.6 Gallon Wet Dry Vacuum 0960-20 0960-21

We’ve seen 12 volt vacuums before but this one is very similar to 18 volt 2 gallon wet dry vacuums, in size and features and is also said to have performance similar to 18 volt vacs. Much like the M18 2 gallon wet dry vacuum, this M12 also has the ability to do both wet and dry vacuuming and has a 1.6 gallon tank capacity making it more compact than the M18 model. It also offers the same 45 cfm suction as the M18 model and that’s thanks to the M12 Fuel models brushless motor. Runtime is said to be up to 14 minutes in High Mode and 26 minutes in Low Mode with a 6.0 XC battery. It’s also said to be up to 2X quieter than other wet/dry vacuums in its class. It also has a built in blower port making it fully featured. Also the HEPA filter is compatible with the larger M18 2 gallon wet dry vacuum. It launches October 2020.

  • similar in design to M18 2 gallon wet dry vacuum
  • underlid onboard storage
  • Air Volume: 45 CFM
  • Sealed Suction in Water: 42”
  • Canister Capacity: 1.6 Gallons
  • Inlet Diameter: 1-1/4”
  • Height: 11.9”
  • Length: 13.7”
  • Width: 8.7”
  • Weight: 10.6 lbs
  • Warranty: 5-Year Tool, 3-Year Battery
  • Includes: M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum, M12™ XC6.0 Battery, M12™ Charger, Hose, HEPA Filter, Crevice Tool, Utility Nozzle, and Wall Mount Kit
  • *Bare tool also available (0960-20)

Milwaukee M12 23 Gauge Pin Nailer 2540-20, 2540-21

The M12TM 23GA Pin Nailer is the most compact cordless pin nailer that combines precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. Its lightweight design provides unmatched productivity and accessibility into tight spaces and confined corners. A nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or soft woods while leaving small, clean nail holes. The double action trigger and non-marring precision point tip allows for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. This pin nailer drives 23-gauge headless pin nails ranging in length from 1/2″ to 1-3/8″ and can fire up to 750 pin nails per charge.

  • LED light
  • belt clip
  • precise tip
  • dryfire lockout
  • up to 750 pin nails per charge
  • double action trigger
  • Not Fuel not brushless

Milwaukee M12 Fuel Oscillating Multi-Tool 2526-21XC 2526-20 – already announced earlier

Milwaukee M12 Fuel Hatchet 6” Pruning Saw 2527-21 2527-20 – Chain Saw – already announced earlier

New In MX Fuel

Nothing new was announced for MX Fuel during the Pipeline event however they did go over several of the tools. They did say more was coming but did not specify so we will have to wait.

Milwaukee MX Fuel 14″ Cut Off Saw MXF314-1XC – already announced earlier

  • as fast or faster than gas powered

Milwaukee MX Fuel Breaker MXF368-1XC – already announced earlier

  • less vibration

Milwaukee MX Fuel Handheld Core Drill MXF301-1CP MXF301-2CXS – already announced earlier

MX Fuel sewer drum machine – already announced earlier

MX Fuel carry on power supply – already announced earlier

MX Fuel Rocket tower light – already announced earlier

New In Power Tool Accessories

New Milwaukee Oscillating Multitool blades – out now

Milwaukee Tool continues to enhance their line of unique cutting solutions with the introduction of carbide teeth, multi-material, metal, wood, and specialty Oscillating Multi Tool Blades. The new multi-tool blades are complete with a Universal Fit OPEN-LOKTM Connection for quick blade changes and each blade is equipped to tackle a variety of jobsite applications.

AX & Wrecker Carbide Pruning Sawzall reciprocating saw blades

Our AXTM with Carbide Teeth SAWZALL® Blades for Pruning & Clean Wood are designed for the fastest above and below ground cutting applications. These SAWZALL® pruning blades offer up to 50X more life vs. carbon steel reciprocating saw blades available today.

  • 6, 9, 12 inch blade sizes
  • comes out in September 2020


DISCLOSURE:
Tool Craze does not sell this product or any product on the Tool Craze website. Tool Craze does not handle the sale of any item in any way. If you purchase something through a link on the Tool Craze site, Tool Craze may get a small share of the sale. Please refer to the About section for more info.

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x